- Fluke network inspector 4.1 Patch#
- Fluke network inspector 4.1 pro#
- Fluke network inspector 4.1 verification#
- Fluke network inspector 4.1 software#
Point W is width, the horizontal distance from left to right D H is height, the vertical distance from the lowest to highest Rechargeable lithium ion battery (installed) or AC powerġ4 x 4.57 x 4.32cm/5.5 x 1.8 x 1.7 inches (H x W x D)Ģ2 x 10 x 5.3mm/9.1 x 4.3 x 2.6 inches (H x W x D)
Fluke network inspector 4.1 pro#
Spectral width, FWHM (full width at half maximum)ġ4.2 x 8.1 x 4.1cm/5.6 x 3.2 x 1.6 inches (H x W x D)įT600 FiberInspector Pro Video Microscope Specifications Single-mode fiber 62.5μm and 50μm multimode fiberĠ.05dB to 50.0dB (selectable in 0.05dB increments up to 10.0dBġ4.5 x 8.0 x 3.9cm/5.7 in x 3.2 in x 1.5 inches MPO interface for 12-fiber, unpinned plugs
Test cords, MPO adapters, an AC adapter/battery charger for theįiberInspector Pro, batteries for each device, two carrying InĪddition to the MultiFiber Pro, 850nm multimode light source, andįiberInspector Pro with adapter tips, the kit includes a set of
Fluke network inspector 4.1 Patch#
Patch panel bulkheads without disassembling the panel. Inserted through bulkhead adapters for examining patch cords and The display has a 9cm (3.5") TFT (thinįilm transistor) LCD for viewing end faces. Tips-ST, SC, and universal 2.5mm patch cord tip-for accommodatingĭifferent connector ports. Microscope includes an MPO tip for inspection of MPO connectedįibers and cassettes, and an additional set of probe adapter The FiberInspector Pro video microscope, consisting of a handheldĭisplay unit and probe, magnifies to 200X and 400X for inspectingįiber end-faces to check for contamination or damage. Performance of fiber optic cable in data centers and enterprise Optical power meters are usedīy network technicians to troubleshoot, maintain, and optimize Specifications ( ) include a display resolution of 0.01dB and variousĮnvironmental operating conditions. Off after 10, 20, 30, or 60 minutes of non-use to conserveīattery life and has a low-battery indicator. The meter can be set to automatically power
Fluke network inspector 4.1 software#
The software is compatible with Microsoft Windows XP, Vista, andħ operating systems. To a computer for long-term records retention, or for analysisĪnd generation of certification reports using LinkWare software. Stores up to 3,000 test results (the equivalent of 250 MPOĬables), that can be downloaded via the meter's USB 2.0 interface The need for fan-out cords and is shuttered to protect againstĬontamination from dirt and dust. To suit specific applications and an indicator lights when the Loss thresholds for the meter can be adjusted Tested, so that individual fibers that fail test limits areĬlearly displayed. Identifies each fiber within the MPO connector that is being
Fluke network inspector 4.1 verification#
Source measures power and loss and validates polarity on all 12įibers in an MPO fiber trunk, displaying test results for all 12įibers in six seconds and ensuring end-to-end connectivity withīuilt-in polarity verification per Telecommunications IndustryĪssociation (TIA) standard TIA-568-C.0. Meter with on-board MPO (multifiber push-on) connector and light Microscope for verification and inspection of MPO fiber in dataĬenters and enterprise networks. MultiFiber Pro optical power meter with on-board MPO connector,Īn 850nm multimode light source, and a FiberInspector Pro video The Fluke Networks MFTK1400 fiber optic cable test kit includes a
0 kommentar(er)
